|
|
Crag001
New User
Aug 11, 2011, 11:25 AM
Post #1 of 6
(1592 views)
|
98 Dodge WIERD
|
Sign In
|
|
I have a 98 Dodge Grand Caravan with a 3.3. The van will turn over but not start so to see if it was a fuel problem or a spark problem I put raw gas in the intake and turned it over. It started and ran and I drove it about a mile. Parked it for 30 minutes and it would turn over but not start.
Repeat above.
Anybody have any idea where to start looking for the problem. It started right after we bought 20 bucks worth of fuel.
UPDATE: Have spark, No place to check fuel pressure
Craig
(This post was edited by Crag001 on Aug 11, 2011, 12:27 PM)
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 11, 2011, 6:27 PM
Post #2 of 6
(1549 views)
|
|
Re: 98 Dodge WIERD
|
Sign In
|
|
There is a fuel pressure test port. Right in the center of the fuel rail in front of the two middle intake runners.
Fuel pressure should be 49 psi key on engine off.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Aug 11, 2011, 6:50 PM)
|
|
| |
|
|
Crag001
New User
Aug 12, 2011, 4:58 PM
Post #3 of 6
(1526 views)
|
|
Re: 98 Dodge WIERD
|
Sign In
|
|
SOMEBODY SLAP ME
It is a 3.0 not a 3.3
i can not find a fuel pressure port
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Aug 12, 2011, 8:14 PM
Post #4 of 6
(1518 views)
|
|
Re: 98 Dodge WIERD
|
Sign In
|
|
Follow the fuel line, there's one somewhere no matter what engine,
T
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 13, 2011, 3:10 AM
Post #5 of 6
(1512 views)
|
|
Re: 98 Dodge WIERD
|
Sign In
|
|
No, it doesn't necessarily have one. Most of the fuel pressure gauge kits come with adapters to you can "T" into various type line connections.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 13, 2011, 8:00 AM
Post #6 of 6
(1500 views)
|
|
Re: 98 Dodge WIERD
|
Sign In
|
|
Ya, that one you have to T into a line on the supply side. Most master fuel pressure kits come with the adapters for that. Fuel pressure should be somewhere around 43-53 psi and should hold when you turn the pump off.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
2006 Toyoto Camry XLE Driver Side Electric Window Trouble
Tierod end change caused some kind of leak
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
