Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes
When I bought this car in summer 2023, a...

with_replies.gif image wrench.gif Grounding Cable, 2017 Jeep Renegade Trailhawk
The Cable that connects my negative batt...

hot_with_replies.gif image wrench.gif Rough Idle (Found new thing)
Hi everyone. First of all sorry for bad ...

with_replies.gif image  locked   equipment
hey yall. im a first year engineering st...

with_replies.gif image   HELP
I have a 1956 1/2 ton panel truck, 69 35...

no_replies.gif image   Howdy
    Just wanted to s...

with_replies.gif image   ABS/Tractiob/Brake Lights on But No DTCs
Hello all, Recently while driving m...

with_replies.gif image   Chevy strut replacement
I'm trying to get a sensor of some kind ...

with_replies.gif image   2020 suburban new transmission and issues after install
recently had the transmission fail at 11...

with_replies.gif image   Caliper piston post cleaning won't screw in
Hello, 2013 Hyundai Elantra limited (ma...




Search Auto Parts

97 honda accord abs problem

  Email This Post



Darin
New User

Aug 31, 2011, 7:20 PM

Post #1 of 3 (6596 views)
97 honda accord abs problem Sign In
have 97 honda accord with abs light on. How can I get and read codes from abs system. I know there is a port under passenger side dash, however that is all. Please help


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Sep 1, 2011, 3:22 AM

Post #2 of 3 (6571 views)
Re: 97 honda accord abs problem Sign In
NOTE: This operation can also be carried out with Honda PGM Tester.




SCS Service Connector #07PAZ-0010100

  1. Connect the SCS service connector to the service check connector under the glove box.
  2. Turn the ignition switch ON (II), but do not start the engine.

Gauge Assembly

  1. Record the blinking frequency of the Anti-lock Brake System (ABS) indicator light. The blinking frequency indicates the diagnostic trouble code (DTC).

Reading DTC

NOTE: Check the DTC carefully and record it. The memory of the DTC is erased if the connector is disconnected from the ABS control unit.

  • Turn the ignition switch ON (II). The ABS indicator light comes on for two seconds to check the bulb.
  • The ABS control unit indicates the DTC three times.
  • If you miscount the blinking frequency or if you recheck the blinking frequency, turn the ignition switch OFF then turn it ON (II) to cycle the ABS indicator light again.
  1. Remove the SCS service connector.

NOTE: The Malfunction Indicator Lamp (MIL) will stay on after the engine is started if the SCS service connector is connected.

  1. Remove the ABS B2 (15 A) fuse in the under-hood ABS fuse/relay box for at least three seconds to erase the ABS control unit's memory.




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Sep 1, 2011, 3:23 AM)


Darin
New User

Sep 1, 2011, 7:37 PM

Post #3 of 3 (6545 views)
Re: 97 honda accord abs problem Sign In
thank you for the information.





  Email This Post
 
 


Feed Button
Search for (options) Privacy Sitemap