Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

97 S Blazer 4x4 problem


  Email This Post



Guest
Anonymous Poster
ricoshea@sympatico.ca

Nov 13, 2006, 2:44 PM

Post #1 of 3 (1346 views)
97 S Blazer 4x4 problem Sign In

I'm having a problem with my 4wd. Not push button it is a floor shift. When in 2wd positon. The 4x4 light stays on. But you can hear and feel it come out of 4x4. When slowing from highway speed it sounds like the 4x4 is trying to kick in. When I slow enough you can hear and feel it kick in. However when its put in 4x4 this does not happen. What do you guys think?


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Nov 13, 2006, 5:05 PM

Post #2 of 3 (1341 views)
Re: 97 S Blazer 4x4 problem Sign In

This type of 4WD is not meant to be used on dry roads as you must know. If this is the vacuum diaphragm (I think underhood on front right fender well, than plug off that line and see if light goes out. At least if that works you should save any possible damage till this gets fixed. I nursed one of my own for six years on a rusty old snow plow S-10, T



Guest
Anonymous Poster

Nov 20, 2006, 5:52 AM

Post #3 of 3 (1326 views)
Re: 97 S Blazer 4x4 problem Sign In

I've since narrowed down the problem. The cable and diaphram were stuck. I got it unstuck and changed the diff oil. The light was out all was good until I started the truck and made vacum. The light came back on. Like you said I pinched the line the light went out. Let it go light goes on. Any idea why theres vacum there when it shouldn't be.






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap