|
|
97 Mirage Belt Assembly Problem.
|
|
|
| |
|
|
dgf
New User
Nov 21, 2010, 12:23 PM
Post #1 of 6
(1491 views)
|
97 Mirage Belt Assembly Problem.
|
Sign In
|
|
1997
Mitusbishi
Mirage
Unsure of the Engine Size as the car is not with me
~165,000 Miles
I hope this is in the right forum, here is my question:
Recently the Wheel attached to my AC unit froze up, not allowing the driveshaft to turn. The belt that is attached to the AC, is attached to the Driveshaft, the AC, and the Power Steering.
I took the belt off, and I am able to drive just fine, as there is another belt going to the alternater. The only problem is no power steering (I am not concerned with the AC as it has not worked for a few years).
I am just wondering if driving with this belt dissenganged would cause any problems to my engine, untill i am able to get the bearings replaced on my AC wheel.
Driving without power steering is not very difficult because the car is fairly small, I am only concerned with damaging the engine or its components with prolonged (2+ weeks of driving) use without the belt in use.
If more info is needed I can provide.
Thanks for your time,
Damian
(This post was edited by dgf on Nov 21, 2010, 12:24 PM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 21, 2010, 12:28 PM
Post #2 of 6
(1481 views)
|
|
Re: 97 Mirage Belt Assembly Problem.
|
Sign In
|
|
Can't tell you anything without the engine size as far as what else would be effected but driving the car that has power steering with it disconnected will damage the power steering.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Nov 21, 2010, 12:29 PM)
|
|
| |
|
|
dgf
New User
Nov 21, 2010, 2:32 PM
Post #3 of 6
(1475 views)
|
|
Re: 97 Mirage Belt Assembly Problem.
|
Sign In
|
|
The engine size is 1.8L
Driving it around the block without the belt on resulted on nothing out of the ordinary except loss of power steering.
However if driving it without the belt through the power steering fly wheel will result in permanent damage to the power steering, I will try to get the AC bearings replaced asap.
I will have to drive it a couple of miles to a shop, do you think that the couple of miles would cause damage needing repair?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 21, 2010, 2:35 PM
Post #4 of 6
(1470 views)
|
|
Re: 97 Mirage Belt Assembly Problem.
|
Sign In
|
|
A short distance isn't bad but it will eventually pump the oil out.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
dgf
New User
Nov 21, 2010, 2:57 PM
Post #5 of 6
(1466 views)
|
|
Re: 97 Mirage Belt Assembly Problem.
|
Sign In
|
|
Would it be possible to keep a bottle of Power Steering Fluid at hand, and check the fluid stick often, and fill as needed?
Or would the fluid not be pumped back into the system? If there is a way I can drive this to and from work untill payday I need too.
Also thank you very much for your info, it is exaclty what I needed to know.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 21, 2010, 2:59 PM
Post #6 of 6
(1463 views)
|
|
Re: 97 Mirage Belt Assembly Problem.
|
Sign In
|
|
No, you shouldn't derive a power steering car with no belt for any length of time.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes
equipment
Howdy
