|
|
gmac1970
Novice
Nov 4, 2012, 9:37 AM
Post #1 of 11
(1890 views)
|
|
2008 diesel passat
|
Sign In
|
|
Help wanted please,
recently purchased a 2008 TDI Passatt. I noticed a knocking noise which when the clutch was depressed seemed to stop. I was told the flywheel needed replacing and had this done. Since replacing the flywheel the clutch pedal seems to dissapear after doing 50-60 miles but returns when left undriven for an hour or so
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Nov 4, 2012, 8:03 PM
Post #2 of 11
(1832 views)
|
|
Re: 2008 diesel passat
|
Sign In
|
|
Are you saying the clutch won't disengage unless it sits for a while?
|
|
| |
|
|
gmac1970
Novice
Nov 5, 2012, 10:51 AM
Post #3 of 11
(1812 views)
|
|
Re: 2008 diesel passat
|
Sign In
|
|
Basically yes,the clutch pedal is flat to the floor. I know nothing about motors so any advice greatly appreciated.
thanks Gary
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Nov 5, 2012, 6:18 PM
Post #4 of 11
(1785 views)
|
|
Re: 2008 diesel passat
|
Sign In
|
|
What is the fluid level in the clutch master cylinder? Was it, the slave or both replaced when the new clutch was installed?
|
|
| |
|
|
gmac1970
Novice
Nov 7, 2012, 11:54 AM
Post #5 of 11
(1768 views)
|
|
Re: 2008 diesel passat
|
Sign In
|
|
only the flywheel was replaced,not the clutch. Sorry,but I really know nothing about cars
thanks
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 7, 2012, 3:10 PM
Post #6 of 11
(1764 views)
|
|
Re: 2008 diesel passat
|
Sign In
|
|
Why would someone go all to way to replacing a flywheel and not replace the clutch?
That's crazy. The transmission was out of the car.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Nov 7, 2012, 5:40 PM
Post #7 of 11
(1759 views)
|
|
Re: 2008 diesel passat
|
Sign In
|
|
Makes no sense to me either. The flywheel contacts the clutch friction plate. If the flywheel is bad the clutch is bad. Besides, after you pay all that labor there is absolutely no reason to leave a used clutch in there that will just have to come back out again later.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 7, 2012, 6:43 PM
Post #8 of 11
(1750 views)
|
|
Re: 2008 diesel passat
|
Sign In
|
|
I believe that it has that dual mass flywheel setup. Maybe it gave up. Still they should have replaced the clutch, release bearing, and pressure plate.
How long ago was the flywheel replaced? Since they had that all apart, it still might be under warranty if it is something they messed up.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
gmac1970
Novice
Nov 11, 2012, 1:01 PM
Post #9 of 11
(1727 views)
|
|
Re: 2008 diesel passat
|
Sign In
|
|
flywheel is only 3 weeks old,drove the car over the weekend and same thing happening
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 11, 2012, 1:06 PM
Post #10 of 11
(1722 views)
|
|
Re: 2008 diesel passat
|
Sign In
|
|
Maybe you should have put the rest of the part that go with that job in.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
gmac1970
Novice
Nov 12, 2012, 11:20 AM
Post #11 of 11
(1707 views)
|
|
Re: 2008 diesel passat
|
Sign In
|
|
i was told the flywheel would of cured the problem. The car is still under the garage warranty and just wanted some ammunition to take with me when i return the car
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
