|
|
2003 Ford Focus OBDll scan tool wont connect
|
|
|
| |
|
watz
Novice
Sep 7, 2019, 2:31 PM
Post #1 of 7
(1625 views)
|
2003 Ford Focus OBDll scan tool wont connect
|
Sign In
|
|
2003 Ford Focus ZTW wagon 3.2L 84000 miles. I have a BlueDriver OBDll Scan tool that will not connect to this car. I have checked the fuse and the 12v outlet both are ok. The BlueDriver will connect to my other other car just fine, so no problem with the scan tool. Any ideas? Thanks!!
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 7, 2019, 2:45 PM
Post #2 of 7
(1619 views)
|
Re: 2003 Ford Focus OBDll scan tool wont connect
|
Sign In
|
|
Do you have power at pin #16 of the DLC? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
watz
Novice
Sep 7, 2019, 4:15 PM
Post #3 of 7
(1608 views)
|
Re: 2003 Ford Focus OBDll scan tool wont connect
|
Sign In
|
|
yes
(This post was edited by watz on Sep 7, 2019, 4:23 PM)
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 7, 2019, 4:45 PM
Post #4 of 7
(1598 views)
|
Re: 2003 Ford Focus OBDll scan tool wont connect
|
Sign In
|
|
Then your scan tool isn't capable of reading the communication protocol that car uses or there is a problem with the CAN system of the car. Is the scan tool capable of reading any other modules in the car? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
watz
Novice
Sep 9, 2019, 4:18 PM
Post #5 of 7
(1571 views)
|
Re: 2003 Ford Focus OBDll scan tool wont connect
|
Sign In
|
|
Not sure I know what you mean by "Is the scan tool capable of reading any other modules in the car?". There is only one connector and it wont connect, I can't read anything at all. I will contact BlueDriver support and see if they can enlighten me. i will post back if I get an answer. Thanks!
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 9, 2019, 4:38 PM
Post #6 of 7
(1565 views)
|
Re: 2003 Ford Focus OBDll scan tool wont connect
|
Sign In
|
|
There are numerous modules that are accessed through the same connector. They are all connected on the same CAN network. Different vehicles use different communication protocols and some code readers aren't equipped for all protocols. Possible modules are ABS Body Control Lighting Dash Cluster Audio systems HVAC systems Not all vehicles have all these modules but many do and many have considerably more of them. If you can access other modules, that would indicate the problem is not with the scan tool although if what you have is simply a generic code reader, it won't have any of these capabilities. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
watz
Novice
Sep 9, 2019, 8:08 PM
Post #7 of 7
(1555 views)
|
Re: 2003 Ford Focus OBDll scan tool wont connect
|
Sign In
|
|
Okay, I gotcha. No, It's not communicating with any of modules at all. I will post if I find out anything new on this... for posterity. No pun intended.
|
|
| |
|