|
|
2000 ford windstar no spark on 3/4 and 2/6 coil
|
|
|
| |
|
Lido
Novice
Nov 4, 2013, 8:25 PM
Post #1 of 17
(1903 views)
|
2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
On 2000 windstar the problem star with no spark on coil 3/4 now is worst no spark on coil 2/6 too, replace crank and cam sensors,it make no difference, can the ECM be bad? Is any body know this? Thank you for replay.
(This post was edited by Lido on Nov 4, 2013, 8:27 PM)
|
|
| |
|
nickwarner
Veteran
/ Moderator
Nov 5, 2013, 2:47 AM
Post #2 of 17
(1885 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
If the other coil has spark, your cam and crank sensors are fine. How have you verified no spark? Is this all the time or intermittent? What code numbers are coming up when the ECM is scanned?
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 5, 2013, 3:36 AM
Post #3 of 17
(1884 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
How about some basics like an engine size? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Lido
Novice
Nov 5, 2013, 12:13 PM
Post #4 of 17
(1871 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
Is a 3.8 engine
|
|
| |
|
Lido
Novice
Nov 5, 2013, 12:16 PM
Post #5 of 17
(1870 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
First I unplug the spark plug wires from the coil and no spark exep on 1/5 and some times 2/6, then I check for pulsation on the wires to feed the coil and I have pulsation light only on 1/5 the others is steady light
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 5, 2013, 12:19 PM
Post #6 of 17
(1868 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
What did you use to check for pulse? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Lido
Novice
Nov 5, 2013, 1:32 PM
Post #7 of 17
(1865 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
A noid light
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 5, 2013, 1:43 PM
Post #8 of 17
(1861 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
We are quizzing you so much because everything is pointing to a bad PCM, although it could just as easily be the wiring in between the PCM and ignition module. I would also be very suspicious of the coil being the cause if it does turn out to be a PCM. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Lido
Novice
Nov 5, 2013, 2:01 PM
Post #9 of 17
(1857 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
I install twice brand new coils, and the problem still ther, do you know the location of the ignition module.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 5, 2013, 2:09 PM
Post #10 of 17
(1854 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
There is no ignition Module. I misspoke when I mentioned that. The PCM does that job. It's the wiring between the coil and PCM I meant. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Lido
Novice
Nov 5, 2013, 2:20 PM
Post #11 of 17
(1852 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
Did you know what pin # feeds the coil pack? Than you
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 5, 2013, 2:26 PM
Post #12 of 17
(1851 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
2/6 pin 78 pk/wh 3/4 pin 52 rd/lb 1/5 pin 26 Db/Lg ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Lido
Novice
Nov 5, 2013, 2:36 PM
Post #13 of 17
(1848 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
Thank you for the info I'm goin to check that
|
|
| |
|
Lido
Novice
Nov 7, 2013, 8:34 AM
Post #14 of 17
(1817 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
Hi again, on the 2000 windstar what will be the position of the pins for the coils?
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 7, 2013, 9:05 AM
Post #15 of 17
(1813 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
That should be pretty obvious with the wire colors. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Lido
Novice
Nov 12, 2013, 6:21 PM
Post #16 of 17
(1791 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
Hello again ok someone with a scanner same how ajust the computer and now all the coils are firing, I just have a question about the cylinder compression how much psi the should have to consider a good engine Thank you.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 12, 2013, 6:26 PM
Post #17 of 17
(1790 views)
|
Re: 2000 ford windstar no spark on 3/4 and 2/6 coil
|
Sign In
|
|
There is nothing he can adjust in the computer to make ignition drivers start working so I would be very suspect of that story. Compression Test-Test Results The indicated compression pressures are considered within specification if the lowest reading cylinder is within 75 percent of the highest reading. For additional information, refer to the Compression Pressure Limit Chart. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|