|
|
1995 honda passport clutch problems
|
|
|
| |
|
|
sundayeveryday13
New User
Dec 29, 2009, 6:25 PM
Post #1 of 9
(6406 views)
|
1995 honda passport clutch problems
|
|
|
we have replaced our clutch on our 1995 honda passport and it keeps pulling the wedge collar which clicks on to the throw out bearing out of the pressure plate. is this common?2wd 6cyld
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Dec 30, 2009, 6:07 PM
Post #2 of 9
(6392 views)
|
|
Re: 1995 honda passport clutch problems
|
|
|
Strange...I guess my reply disappeared........we'll try again.
No that's not normal.....I'm assuming you are talking about the collar that is pressed in the the T/O bearing.....
Is it coming apart when you are trying to reinstall the trans or after the trans is in and you are using the clutch...........
|
|
| |
|
|
sundayeveryday13
New User
Jan 2, 2010, 3:47 AM
Post #3 of 9
(6376 views)
|
|
Re: 1995 honda passport clutch problems
|
|
|
after transmission is in and we are using clutch the ring comes off of the wedge collar therefor the throw out bearing comes unlocked from the pressure plate.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jan 2, 2010, 9:17 PM
Post #4 of 9
(6365 views)
|
|
Re: 1995 honda passport clutch problems
|
|
|
I'm having a hard time picturing this. Once the trans is installed there really isn't (or shouldn't be) enough play for the bearing assembly to come apart. If the bearing is coming off the fork, is may be bent or cracked. I would be taking a close look and that and also double check the parts installed to make sure you got the right ones....
This isn't your exact assembly but the fork is the "Y" piece that holds the T/O bearing....
|
|
| |
|
|
sundayeveryday13
New User
Jan 11, 2010, 4:31 PM
Post #5 of 9
(6346 views)
|
|
Re: 1995 honda passport clutch problems
|
|
|
I really appreciate your help but that is not the part that is coming apart it is on the other side where the t/o bearing attaches to the clutch pressure plate. The clutch is not a push type clutch it pulls on the pressure plate. The t/o bearing locks into a wedge collar which is in the pressure plate that is what keeps pulling out. I hope that makes sense.
|
|
| |
|
|
Loren Champlain Sr
Veteran
/ Moderator
Jan 11, 2010, 5:41 PM
Post #6 of 9
(6336 views)
|
|
Re: 1995 honda passport clutch problems
|
|
|
 The top pic is the pressure plate. Throw-out bearing just to the right, alignment tool, pilot bearing directly below the pressure plate, the clutch disc at the bottom.
Which part are you having an issue with?
Loren
SW Washington
|
|
| |
|
| | |
|
|
ClimberBill
New User
Jul 24, 2010, 6:16 PM
Post #8 of 9
(6126 views)
|
|
Re: 1995 honda passport clutch problems
|
|
|
Loren Champlain SR posted a good photo but it doesn't show details. His photo shows the wedge collar assembly already in the pressure plate. The throw-out brg pushes into the wedge collar assembly that is already centered in the pressure plate. The T-O brg should not be able to pull out once it is in place. This has nothing to do with the T-O brg coming off the release fork. Keep in mind the fork pulls on the T-O brg in this installation.
If someone will tell me how, I'll place a couple photos I took showing it in detail.
After installing a new clutch set, a friend of mine had the throw-out brg pull out of the pressure plate twice and sold his Passport to me, rather than attempt it a 3rd time. I took his new clutch kit off and exchanged it at the same parts store. I'll post my results & findings when I'm done.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 24, 2010, 6:19 PM
Post #9 of 9
(6122 views)
|
|
Re: 1995 honda passport clutch problems
|
|
|
Your replying to a thread that hasn't been active for 7 months. Please watch the dates before you reply.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Jul 24, 2010, 6:20 PM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes
Howdy
