Main IndexAuto Repair Home Search Posts SEARCH
Who's Online WHO'S
Log in LOG

1990 Mustang Starting issue.

  Email This Post

New User

Apr 12, 2012, 6:22 PM

Post #1 of 2 (752 views)
post icon 1990 Mustang Starting issue. Sign In

Hi-1990 Mustang GT has been sitting for almost a year. Replaced Battery, had previously replaced starter & Alt. Started for 5 minutes, then died. Now wants to turn over but won't.Has gas. Any advice? Thanks.

Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Apr 12, 2012, 7:13 PM

Post #2 of 2 (717 views)
Re: 1990 Mustang Starting issue. [In reply to] Sign In

All "crank, no start" conditions are approached in the same way. Every engine requires certain functions to be able to run. Some of these functions rely on specific components to work and some components are part of more than one function so it is important to see the whole picture to be able to conclude anything about what may have failed. Also, these functions can ONLY be tested during the failure. Any other time and they will simply test good because the problem isn't present at the moment.
If you approach this in any other way, you are merely guessing and that only serves to replace unnecessary parts and wastes money.

Every engine requires spark, fuel and compression to run. That's what we have to look for.

These are the basics that need to be tested and will give us the info required to isolate a cause.

1) Test for spark at the plug end of the wire using a spark tester. If none found, check for power supply on the + terminal of the coil with the key on.

2) Test for injector pulse using a small bulb called a noid light. If none found, check for power supply at one side of the injector with the key on.

3) Use a fuel pressure gauge to test for correct fuel pressure, also noticing if the pressure holds when key is shut off.

4) If all of these things check good, then you would need to do a complete compression test.

Once you have determined which of these functions has dropped out,
you will know which system is having the problem.


We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.

1990 Mustang Starting issue.

  Email This Post

Latest Forum Post

I have a 1988 Nissan D21 with 124k miles. It's been well taken care of and gener...

car makes a grinding noise when i go in reverse..What could it be?

I have a 86 Ford Bronco with a 302 engine and need a new carb. It is a 2 barrel ...

A?c and heater will not work. The letters "OC" appear on display. What does thi...

I have a '79 Buick with a TH350 non lock-up. It has worked fine after being rebu...

I have a 94 gmc sierra 1500 with a 5.0 and I'm looking for a procedure for insta...

Feed Button

Automotive Forum Categories
AC Auto Repair
Auto Body Repair
Auto Insurance
Automotive Repair
Automotive Wiring
Automotive World
Brake Systems
Car Care Tips
Car Racing
Car Shows and Events
Car Stereo Repair
Car Troubleshooting
Engine and Car Noises
Engine Fault Codes
Engine Troubleshooting
Exhaust System Repair
Gasoline and Motor Oils
General Discussions
Motor Vehicle Inspection
Motorcycle ATV Repairs
Motorcycle Body Repair
Motorcycle Clutch Repair
Motorcycle Engine Repair
Motorcycle Repair
Motorcycle Seat Repair
Remote Control Cars
Steering and Suspension
The Bargin Bin
Traffic Ticket Help
Tricks of the Trade
Truck Repair
Truck Repair Advice
Truck Engine Repair
Truck Suspension Repair
Car Forum - Sitemap

Search for (options) Privacy

web statistics