Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

1988 Olds Cutlass 2.5L Won't start


  Email This Post



rollifd
Novice

Oct 19, 2010, 12:56 AM

Post #1 of 4 (2012 views)
post icon 1988 Olds Cutlass 2.5L Won't start Sign In

BlushGetting pretty frustrated with this *%$# car. It is getting feul and spark but doesn't even seem to try firing. As far as I can tell the timing is dead on and the ignition module under the coils as well as the crank sensor are new and working good... The plugs were good and wet when I pulled them to check... The firing order is good and all wires are in their correct places... HELP PLEASE!!! I need some fresh Ideas...Pirate


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Oct 19, 2010, 2:52 AM

Post #2 of 4 (2010 views)
Re: 1988 Olds Cutlass 2.5L Won't start Sign In

You need to check 2 things. First make sure you have a strong spark by testing it with a spark tester and make sure the spark can jump a 1/2" gap at the plug end of the wire. If that checks out OK, do a compression test on all 4 cylinders and post the results..



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



rollifd
Novice

Oct 19, 2010, 6:22 PM

Post #3 of 4 (1998 views)
Re: 1988 Olds Cutlass 2.5L Won't start Sign In

Ok... Cylinders are within 4 psi of each other and at an average 92 pounds. Ran out of time to check the spark gap idea... gas is good with no H2O and even tried a couple bumps of starting fluid but still didn't even try to fire...


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Oct 19, 2010, 6:30 PM

Post #4 of 4 (1996 views)
Re: 1988 Olds Cutlass 2.5L Won't start Sign In

You have a serious compression problem. That is no where near enough compression.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap