Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









timing marks on 2.2 Liter


  Email This Post



jloma
New User

May 31, 2009, 5:40 PM

Post #1 of 3 (671 views)
Shortcut
post icon timing marks on 2.2 Liter Sign In

Mazda 1991 626 LX non turbo
123,000 miles on the car
The gas was leaking and we replace the fuel filter and holes.
It was workin fine but when we drove up a small hill the made a sound, broke down wouldn't start again. Upon lookin at the Front Pully needed to be replace along with the timing belt and ac belt.
We installed the Front pully and the car wouldnt start, the belts turned but we think the timing marks are wrong.
It start once, and would not start again.

We've tried everything we could think of. Plz help.
Thank u


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

May 31, 2009, 6:26 PM

Post #2 of 3 (660 views)
Shortcut
Re: timing marks on 2.2 Liter [In reply to] Sign In

jloma; Just what pulley failed? You replaced the timing belt? This is an interference engine, meaning that if the timing belt breaks at the wrong nano-second, the pistons can hit the valves that are open at the wrong time, bending them.
Recheck the timing belt alignment. It can't be off even one tooth. If okay, take a compression test. This timing belt also drives the water pump. A faulty water pump can damage the belt. Always a good idea to replace both at the same time.
Loren
SW Washington


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

May 31, 2009, 6:29 PM

Post #3 of 3 (660 views)
Shortcut
Re: timing marks on 2.2 Liter [In reply to] Sign In

I'm giving you the timing marks but there's a good chance that what your problem is, is bent valves. This is an interference engine and if the belt breaks while the engine is running or if the engine is rotated out of time, the piston will hit the valves and bend them.
What you will have to do is verify the timing marks and then do a compression test.







~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.





Advertising


  Email This Post
 
 






Latest Forum Post

A few days ago my driver-side headlight went out, and last night my passenger-si...


I have a weird situation in that my run lights won't work on my utility trailer....


I recently blew an engine-'01 CHEV SILVERADO 5.3L-& had an '02 5.3L transpla...


hi, my engine still runs after i turn the key off then dies after few seconds, w...


My 1995 Nissan Quest starts just fine. When I depress the brake pedal and move t...


I have a 1992 ford ranger 3.0l v6 5 speed. today i ran out of gas and when i got...


Feed Button






Automotive Forum Categories
AC Auto Repair
Auto Body Repair
Auto Insurance
Automotive Repair
Automotive Wiring
Automotive World
Brake Systems
Car Care Tips
Car Racing
Car Shows and Events
Car Stereo Repair
Car Troubleshooting
Engine and Car Noises
Engine Fault Codes
Engine Troubleshooting
Exhaust System Repair
Gasoline and Motor Oils
General Discussions
Motor Vehicle Inspection
Motorcycle ATV Repairs
Motorcycle Body Repair
Motorcycle Clutch Repair
Motorcycle Engine Repair
Motorcycle Repair
Motorcycle Seat Repair
Remote Control Cars
Steering and Suspension
The Bargin Bin
Traffic Ticket Help
Tricks of the Trade
Truck Repair
Truck Repair Advice
Truck Engine Repair
Truck Suspension Repair
Car Forum - Sitemap


Search for (options) Privacy