Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

ignition lock cylindee


  Email This Post



eyob07
User

Jan 23, 2017, 1:09 PM

Post #1 of 7 (321 views)
ignition lock cylindee Sign In

Hi there everyone, this is a 2002 sienna 3.0 engine, want to replace the ignition lock cylinder, I just did what i now but, i couldn't take it out, what I did was i turn the key to the acc position and press the spring under the lock and slid it out, this didn't work for me what did I miss, please help, thank you all.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jan 23, 2017, 1:46 PM

Post #2 of 7 (314 views)
Re: ignition lock cylindee Sign In

Those are the instructions



    1. Place the ignition key at the ACC position.
    2. Push down the stop pin with a screwdriver, and pull out the cylinder.
    3. Install a new cylinder.

You will know you have the key in the right position when you are able to push the pin in. It won't go in until the key is correct.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Jan 23, 2017, 1:48 PM)


eyob07
User

Jan 23, 2017, 2:49 PM

Post #3 of 7 (294 views)
Re: ignition lock cylindee Sign In

hi there thank you help, my question,is the stop button is it on the top or underneath thank you and God bless


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jan 23, 2017, 3:30 PM

Post #4 of 7 (288 views)
Re: ignition lock cylindee Sign In

The only info I have is the picture. You should be able to just look and see.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



eyob07
User

Jan 23, 2017, 5:13 PM

Post #5 of 7 (276 views)
Re: ignition lock cylindee Sign In

thank you


eyob07
User

Jan 26, 2017, 7:16 PM

Post #6 of 7 (254 views)
Re: ignition lock cylindee Sign In

Hi there again I have hard to find this ignition lock cylinder, someone suggested, it's the same for corrals, Rav 4. what is you opinion, thank you.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jan 26, 2017, 7:21 PM

Post #7 of 7 (250 views)
Re: ignition lock cylindee Sign In

If the parts were the same, the part would be available for either application.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap

shopify
site analytics