Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN




2001 s10 blazer won't start P0452 code


  Email This Post



Fyassin
New User

Aug 6, 2012, 1:24 AM

Post #1 of 2 (1195 views)
Shortcut
2001 s10 blazer won't start P0452 code Sign In

My 2001 s10 4.3 ltr blazer won't start After new heads,spark plugs and wires, distributor cap and rotor,new starter and battery. Plus getting a p0452 code. I have tried starter fluid into the carborator. Any suggestion would be appreciated.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Aug 6, 2012, 6:06 AM

Post #2 of 2 (1147 views)
Shortcut
Re: 2001 s10 blazer won't start P0452 code [In reply to] Sign In

  All "crank, no start" conditions are approached in the same way. Every engine requires certain functions to be able to run. Some of these functions rely on specific components to work and some components are part of more than one function so it is important to see the whole picture to be able to conclude anything about what may have failed. Also, these functions can ONLY be tested during the failure. Any other time and they will simply test good because the problem isn't present at the moment.
If you approach this in any other way, you are merely guessing and that only serves to replace unnecessary parts and wastes money.



Every engine requires spark, fuel and compression to run. That's what we have to look for.

These are the basics that need to be tested and will give us the info required to isolate a cause.

1) Test for spark at the plug end of the wire using a spark tester. If none found, check for power supply on the + terminal of the coil with the key on.


2) Test for injector pulse using a small bulb called a noid light. If none found, check for power supply at one side of the injector with the key on.


3) Use a fuel pressure gauge to test for correct fuel pressure, also noticing if the pressure holds when key is shut off.

4) If all of these things check good, then you would need to do a complete compression test.

Once you have determined which of these functions has dropped out,
you will know which system is having the problem.




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.





Advertising


  Email This Post
 
 






Latest Forum Post

Hey everyone. I've got my great 84 VW Jetta. It's my first car and while I've ...


hi, my engine still runs after i turn the key off then dies after few seconds, w...


I have a 12v solenoid with the standard two large terminals and it has TWO small...


Hi Everyone, I have a 2000 Oldsmobile intrigue that when I turn it on the brake ...


I apologize I have not got a lot of time in it so far, so I do not have a lot of...


I have a 1992 ford ranger 3.0l v6 5 speed. today i ran out of gas and when i got...


Feed Button






Automotive Forum Categories
AC Auto Repair
Auto Body Repair
Auto Insurance
Automotive Repair
Automotive Wiring
Automotive World
Brake Systems
Car Care Tips
Car Racing
Car Shows and Events
Car Stereo Repair
Car Troubleshooting
Engine and Car Noises
Engine Fault Codes
Engine Troubleshooting
Exhaust System Repair
Gasoline and Motor Oils
General Discussions
Motor Vehicle Inspection
Motorcycle ATV Repairs
Motorcycle Body Repair
Motorcycle Clutch Repair
Motorcycle Engine Repair
Motorcycle Repair
Motorcycle Seat Repair
Remote Control Cars
Steering and Suspension
The Bargin Bin
Traffic Ticket Help
Tricks of the Trade
Truck Repair
Truck Repair Advice
Truck Engine Repair
Truck Suspension Repair
Car Forum - Sitemap


Search for (options) Privacy