|
|
1995 pontiac sunfire PLEASE HELP
|
|
|
| |
|
|
jarret83
User
Nov 17, 2013, 4:33 PM
Post #1 of 8
(2998 views)
|
|
1995 pontiac sunfire PLEASE HELP
|
Sign In
|
|
Recently whenever im on the highway and come to a stop light, i apply the brake and as my car comes to a halt, it like chokes and dies. Its only done this for two weeks now and i have no clue what it would be, i put a new MAP sensor on, still does it. it doesnt do it in town, only when im on the highway, there has also been a little loss in performance as well. any help is aprecciated! thank you!!
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 17, 2013, 9:56 PM
Post #2 of 8
(2977 views)
|
|
Re: 1995 pontiac sunfire PLEASE HELP
|
Sign In
|
|
3 speed automatic? When it does this, does it feel like your driving a manual transmission and forgetting to push the clutch in when coming to a stop?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Nov 17, 2013, 9:57 PM)
|
|
| |
|
|
jarret83
User
Nov 18, 2013, 6:07 AM
Post #3 of 8
(2960 views)
|
|
Re: 1995 pontiac sunfire PLEASE HELP
|
Sign In
|
|
Yes it is a 3 speed auto. It like jerks then dies. So I guess you coul say it feels like a manual not being drove right.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 18, 2013, 8:00 AM
Post #4 of 8
(2954 views)
|
|
Re: 1995 pontiac sunfire PLEASE HELP
|
Sign In
|
|
Not uncommon on the 3T40 to have the torque converter clutch to stay engaged while coming to a stop causing the engine to stall out. Usually that was caused by a faulty TCC solenoid. You have to remove the transmission's side cover to get access to the solenoid.
+-+TCC+ENGAGEMENT+2.png)
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
jarret83
User
Nov 18, 2013, 8:23 AM
Post #5 of 8
(2948 views)
|
|
Re: 1995 pontiac sunfire PLEASE HELP
|
Sign In
|
|
ive talked to a couple people i know and they said that my catalytic converter could be bad/clogged but your answer makes a lot more sense!! thank you!
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 18, 2013, 11:21 AM
Post #6 of 8
(2936 views)
|
|
Re: 1995 pontiac sunfire PLEASE HELP
|
Sign In
|
|
If the cat was clogged, the engine wouldn't have any power when accelerating.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
jarret83
User
Nov 18, 2013, 10:00 PM
Post #7 of 8
(2914 views)
|
|
Re: 1995 pontiac sunfire PLEASE HELP
|
Sign In
|
|
if my tcc went out, wouldn't it trip a code and show a cel?? i have no lights apparent in my dash.
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Nov 19, 2013, 2:23 AM
Post #8 of 8
(2908 views)
|
|
Re: 1995 pontiac sunfire PLEASE HELP
|
Sign In
|
|
You won't always get a code. If the solenoid windings are intact the ECM will not realize there is an issue. It isn't magic, it can only read voltage on the solenoid. But working electrically a solenoid can still fail mechanically. If the solenoid were drawing too much power or had an open circuit in its windings, then you would see a code because that is something the ECM can see and realize a fault exists.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
