p0328 corolla 2008 - Engine ODB2 Fault Codes


	Auto Repair Home	SEARCH POSTS	WHO'S ONLINE	LOG IN

Automotive Repair

Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:
  Login
  Sign up here!

Latest Forum Post

Grounding Cable, 2017 Jeep Renegade Trailhawk

The Cable that connects my negative batt...

Rough Idle (Found new thing)

Hi everyone. First of all sorry for bad ...

equipment

hey yall. im a first year engineering st...

HELP

I have a 1956 1/2 ton panel truck, 69 35...

Howdy

    Just wanted to s...

ABS/Tractiob/Brake Lights on But No DTCs

Hello all, Recently while driving m...

Chevy strut replacement

I'm trying to get a sensor of some kind ...

2020 suburban new transmission and issues after install

recently had the transmission fail at 11...

2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes

When I bought this car in summer 2023, a...

Caliper piston post cleaning won't screw in

Hello, 2013 Hyundai Elantra limited (ma...

p0328 corolla 2008

Sign up here!

Email This Post

Auto Repair Home>> Automotive Repair>> Engine ODB2 Fault Codes

legendz
User

Oct 19, 2014, 8:54 PM

Post #1 of 3 (2627 views)

p0328 corolla 2008	Sign In

hello, friends, I have u problem with my corolla 2008, me is setting the code p0328 sensor detonation is intermittent one day lights another does not, some vece I erase and lasts a few days but returns again and when it leaves feel good heavy truck to start Here what I done:

Detonation sensor 1- (changed)
2 shot a direct line from the ecu to the sensor to see if there was some check on open circuit anything like
3 all the connections and the whole order was verified

and I still have the problem

beginning when everything had to change the evaporator of the air but they all connect in order and was revised several the problem continues and nothing any suggestions thanks

Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Oct 20, 2014, 2:08 AM

Post #2 of 3 (2608 views)

Re: p0328 corolla 2008	Sign In

The is specifically for an open in the knock sensor circuit. Running an overlay wire was a god idea for testing but that doesn't test the connectors themselves. You could have a poor contact at either end. You might try changing the pigtail at the sensor end and check the contacts at the computer side.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.

legendz
User

Oct 20, 2014, 5:22 AM

Post #3 of 3 (2597 views)

Re: p0328 corolla 2008	Sign In

if thanks I get I put a wire directly from the sensor with the plug and everything since that is not using the rque comes from the ecu just use the one that leaves the computer but the sensor use one I made another cable, I have a small problem to change the plug connector of the sensor detonation and that is fixed or direct from the ecu ie there is no female or something plug so for that you'll post a picture to see do not know if cutting it on the knock sensor and serious butting right

the cable is direct for the ecu no conector female o male to remplacement... can i cut the conect and soldier...

http://postimg.org/image/jj2b8e68t/

(This post was edited by legendz on Oct 20, 2014, 5:24 AM)

Email This Post

Search for (options) Privacy Sitemap