Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

engine fault codes


  Email This Post



raytriker
New User

Sep 13, 2010, 3:43 PM

Post #1 of 4 (4220 views)
engine fault codes Sign In

I have a 1995 jeep wrangler with a 2.5. Engine code 2-1 seems to be flashing. I cannot find a listing for the engine codes for a jeep. Can anyone help?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Sep 13, 2010, 3:49 PM

Post #2 of 4 (4211 views)
Re: engine fault codes Sign In

Diagnostic Trouble Codes - 1995
Jeep
11 IGN reference signal.
12 Battery input to PCM disconnected during last 50 key starts.
13 Fault in the map sensor pneumatic circuit.
14 Fault in the map sensor electrical circuit.
15 Fault in the vehicle speed sensor circuit.
17
Engine running too cool.
21 Problem in the oxygen feedback circuit.
22
Fault in the coolant temperature sensor circuit.
23 Air temperature sensor.
24 Intake air temp. sensor voltage high.
25 Fault in the IAC motor drive circuit.
27
Fault in injector driver interface circuit.
33 Fault in air conditioning cutout relay circuit.
34
S/C solenoid circuits.
35 Fault in fan relay circuit.
41
Fault in the charging system or no field current.
42
Fault in the ASD relay driver circuit.
44
Battery Temp Voltage. 46 Battery voltage is too high.
47
Battery voltage is too low.
51 Lean condition is indicated.
52
Rich condition is indicated.
53
Internal problem in module.
54
No cam position signal.
55 Completion of fault code display.
62
Unsuccessful attempt to update EMR mileage.
63
Unsuccessful attempt to write to an EEPROM location by the controller.


Extracting Fault Codes:

Turn the ignition switch ON, OFF, ON, OFF, ON and observe the CHECK ENGINE LIGHT. The CHECK ENGINE LIGHT should begin to flash a series of codes. The flashes will be separated by short an long pauses. The long pauses separate the "ones" and "tens" positions, and each code from the next. A code 55 will be displayed at the end of the test.




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Sep 13, 2010, 3:51 PM)


way2old
Veteran / Moderator
way2old profile image

Sep 13, 2010, 3:50 PM

Post #3 of 4 (4208 views)
Re: engine fault codes Sign In

Click here and scroll down to the 2 digit codes.



Being way2old is why I need help from younger minds

(This post was edited by way2old on Sep 13, 2010, 3:51 PM)


phyman92
New User

Sep 15, 2010, 11:20 PM

Post #4 of 4 (4186 views)
Re: engine fault codes Sign In


In Reply To
Diagnostic Trouble Codes - 1995
Jeep
11 IGN reference signal.
12 Battery input to PCM disconnected during last 50 key starts.
13 Fault in the map sensor pneumatic circuit.
14 Fault in the map sensor electrical circuit.
15 Fault in the vehicle speed sensor circuit.
17
Engine running too cool.
21 Problem in the oxygen feedback circuit.
22
Fault in the coolant temperature sensor circuit.
23 Air temperature sensor.
24 Intake air temp. sensor voltage high.
25 Fault in the IAC motor drive circuit.
27
Fault in injector driver interface circuit.
33 Fault in air conditioning cutout relay circuit.
34
S/C solenoid circuits.
35 Fault in fan relay circuit.
41
Fault in the charging system or no field current.
42
Fault in the ASD relay driver circuit.
44
Battery Temp Voltage. 46 Battery voltage is too high.
47
Battery voltage is too low.
51 Lean condition is indicated.
52
Rich condition is indicated.
53
Internal problem in module.
54
No cam position signal.
55 Completion of fault code display.
62
Unsuccessful attempt to update EMR mileage.
63
Unsuccessful attempt to write to an EEPROM location by the controller.


Extracting Fault Codes:

Turn the ignition switch ON, OFF, ON, OFF, ON and observe the CHECK ENGINE LIGHT. The CHECK ENGINE LIGHT should begin to flash a series of codes. The flashes will be separated by short an long pauses. The long pauses separate the "ones" and "tens" positions, and each code from the next. A code 55 will be displayed at the end of the test.



thanks for the codes. needed this also






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap