|
|
None of my windows work, can someone help me?
|
|
|
|  |
|

Censored_01
New User
Mar 10, 2023, 11:31 PM
Post #1 of 7
(2173 views)
|
None of my windows work, can someone help me?
|
Sign In
|
|
On my 2010 Traverse LT none of the windows work, I got error codes B1516,B1517,B2645,U0198,U1500, is it because of one of these errors? And, how will I go on to fix this? I just started working on cars so have no idea on where to start. Any help would be appreciated.
|
|
|  |
|

Tom Greenleaf
Ultimate Carjunky
/ Moderator

Mar 11, 2023, 4:31 AM
Post #2 of 7
(2158 views)
|
Re: None of my windows work, can someone help me?
|
Sign In
|
|
OK, for just now what else have you done to this or know of done recently? It's lost communication via wire(s) or proper ground. My guess is something left unplugged or failed/corroded or this could get nasty :-( Tom
|
|
|  |
|

Sidom
Veteran
/ Moderator

Mar 11, 2023, 6:37 PM
Post #4 of 7
(2130 views)
|
Re: None of my windows work, can someone help me?
|
Sign In
|
|
Not all failures can be solved a scan tool. Power windows use a lot of current To start you wanna get a volt meter and a wiring diagram and check the powers and grounds to the switch. A common failure for this type of problem is the wires breaking in the door Boot , due to all the opening and shutting the door
|
|
|  |
|

Hammer Time
Ultimate Carjunky
/ Moderator

Mar 11, 2023, 7:35 PM
Post #5 of 7
(2121 views)
|
Re: None of my windows work, can someone help me?
|
Sign In
|
|
Might not be that simple on this one. Both the switches and the motor are on the can bus. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
|  |
|

Sidom
Veteran
/ Moderator

Mar 11, 2023, 11:26 PM
Post #6 of 7
(2108 views)
|
Re: None of my windows work, can someone help me?
|
Sign In
|
|
Yea depending one which RPO code he has could make things more complex for him. If he had the AXC RPO it would be a bit easier than the AXE. But based off the level of experience and tools he has posted he has, either one is going to be over his pay grade. So if it isn't a a bad power or ground in the boot or a bad master switch, then odds are he won't be solving this one on his own. All those body & network codes could just be a red herring OR they could be very helpful clues to pin point the wiring problem that is setting all those codes. I would save all the FF data, clear them out and see what comes back.
|
|
|  |
|

Tom Greenleaf
Ultimate Carjunky
/ Moderator

Mar 12, 2023, 4:16 AM
Post #7 of 7
(2096 views)
|
Re: None of my windows work, can someone help me?
|
Sign In
|
|
IMO we are ahead of ourselves. OP needs to respond for now this is smashed/burned/cut (??) wires somewhere the result was no power windows working. No point until source cause found or ruled out - right? T
|
|
|  |
|