Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

Ford Ranger engine 2.3 code 1443


  Email This Post



mr+brakes
User

Dec 7, 2012, 7:55 PM

Post #1 of 17 (4415 views)
Ford Ranger engine 2.3 code 1443 Sign In

I have a 1996 Ford Ranger that has a 2.3 and it has an engine code of 1443. I need to know how to resolve this code problem. I really rely on my vehicle to run trouble free since I have a 500 miles a day to make my job work for me.

I thought that I had the engine code resolved, but after all the service engine light comes back on after 40 miles of disconnection of battery to clear code.

On the charcoal canister I had a hose that was pretty rough shape, so I replaced the hose. However at first I found the hose was disconnected.


(This post was edited by mr+brakes on Dec 7, 2012, 7:56 PM)


JeremyR
New User

Dec 7, 2012, 8:01 PM

Post #2 of 17 (4405 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In

*removed for not helping* :)


(This post was edited by JeremyR on Dec 7, 2012, 8:07 PM)


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 7, 2012, 8:06 PM

Post #3 of 17 (4400 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In

This is a purge flow code. Nothing to do with a gas cap.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



mr+brakes
User

Dec 7, 2012, 9:04 PM

Post #4 of 17 (4371 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In

I knew it has nothing to do with gas cap, so what is 1443 and what does it take to resolve the issues?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 8, 2012, 4:07 AM

Post #5 of 17 (4346 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In

The code indicates a problem with purge flow. The flow chart takes a number of turns to other charts, depending on specific test results so it's impossible to post complete procedures.

Here are the first sequence of tests but as you can see, it can go a number of ways next.






~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



mr+brakes
User

Dec 15, 2012, 7:48 PM

Post #6 of 17 (4267 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In

It would be nice to have a diagram of what I'm suppose to test. If if is in the vacuum lines going to the charcoal canister, I replaced the charcoal canister and one of the electrical components so far, and still have problems. I have the other component that I have not replaced yet to install as soon as I get the wiring disconnected to replace it.

Can anyone provide more details and diagrams of this 1443 code error resolutions.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 15, 2012, 7:51 PM

Post #7 of 17 (4259 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In

You already have the flow chart for that code. It is designed to eliminate all possible causes.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Dec 15, 2012, 7:52 PM)


mr+brakes
User

Dec 15, 2012, 9:01 PM

Post #8 of 17 (4246 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In


In Reply To
You already have the flow chart for that code. It is designed to eliminate all possible causes.


Hammer Time:

Your failing to provide a diagram of what I'm suppose to test. Allot of this electrical issues take time and diagrams of what is to be tested.
I'm an old man that remembers the 1930-1970s when vehicles were simple. After 33 years of working on vehicles, I have forgotten as much as I remember.

No offence to you Hammer Time, but I'm not a young man so I just have easier times with older vehicles since their in my time. So at least let me know if the parts is this parameter that I have been looking at.


Sidom
Veteran / Moderator
Sidom profile image

Dec 15, 2012, 9:57 PM

Post #9 of 17 (4241 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In

The chart HT posted is pretty much all you need to test out that.
This is for a purge flow sensor in the evap system. This on the purge side of the evap system and it does what it's name implies, it moniters the flow when the purge valve is open & purging.. If the sensor senses flow when there isn't suppose to be any or no flow when there is suppose to be flow, it will set the code. I'm assuming you are somewhat familar with evap systems & don't need the whole run down of the system....

It's located on the evap hose between the purge valve & port on the intake manifold, on the left side. The chart gives you the voltages & resistances you are looking for at the different pins.

If you are unsure of the pin numbers maybe HT or someone could post pin ID for the valve, my database is down.

If you run the tests and need a different chart post the chart ID you need.....


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 16, 2012, 5:50 AM

Post #10 of 17 (4229 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In


Quote
I'm an old man that remembers the 1930-1970s when vehicles were simple. After 33 years of working on vehicles, I have forgotten as much as I remember.


OH STOP, I'm older than you are. EVAP systems have been in cars for the past 17 years.



This is the sensor at the engine




This is the solenoid at the charcoal canister



PURPOSE
  • The Evaporative Canister Purge Solenoid controls the flow of vapors (purging) from the carbon canister to the intake manifold during various engine operating modes. The Evaporative Canister Purge Solenoid is a normally closed valve in the evaporative emission system.

OPERATION
  • The operation of the Evaporative canister purge solenoid is controlled by the powertrain control module (PCM) . When the engine is off, the Evaporative Canister Purge Solenoid is not energized and is in a closed, non-flowing condition.
  • When the engine is running, the PCM reads engine rpm, engine load, engine temperature and other variables, and decides the proper time for the engine to accept fuel vapors.
  • When this occurs, the PCM energizes the fuel Evaporative Canister Purge Solenoid, allowing flow from the fuel vapor canister to the intake manifold. The vapors are then consumed in the engine. This action "purges" the fuel vapor canister of fuel vapors.




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Dec 16, 2012, 5:56 AM)


Sidom
Veteran / Moderator
Sidom profile image

Dec 16, 2012, 9:44 AM

Post #11 of 17 (4218 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In


In Reply To
OH STOP, I'm older than you are. EVAP systems have been in cars for the past 17 years.



Crankier too!!! Cool But thats just cuz HT found out he's gonna be Santa this year at the annual party......Tongue


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 16, 2012, 10:51 AM

Post #12 of 17 (4211 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In

Haha ................ nobody would ever ask me to do that!



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



nickwarner
Veteran / Moderator
nickwarner profile image

Dec 16, 2012, 10:54 AM

Post #13 of 17 (4207 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In

Everyone would be getting a lump of coal


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 16, 2012, 11:01 AM

Post #14 of 17 (4204 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In

Especially if they pestered me.........................LOL



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Dec 16, 2012, 4:28 PM

Post #15 of 17 (4198 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In

HT, can I sit on your lap if your going to be Santa?







Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.


Sidom
Veteran / Moderator
Sidom profile image

Dec 16, 2012, 4:56 PM

Post #16 of 17 (4191 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In

Too much info!!!!!!


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 16, 2012, 5:34 PM

Post #17 of 17 (4185 views)
Re: Ford Ranger engine 2.3 code 1443 Sign In

Do you have a little trouble getting under dashboards there DS?



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap