Main IndexAuto Repair Home Search Posts SEARCH
Who's Online WHO'S
Log in LOG

Search Auto Parts

2 digit codes showing as ABS codes

  Email This Post

New User

Apr 6, 2015, 8:55 AM

Post #1 of 3 (1174 views)
  post locked   2 digit codes showing as ABS codes  

   I have a '97 Isuzu Hombre, 2.2 liter. I have 4 codes showing up as ABS codes although the definitions have to do with engine sensor issues. The main thing that I would like to know is; What do the various Quad Drivers operate. Also, if I could get some more specific help with the other codes it would be greatly appreciated.

37: Accelerator position sensor 1 and 2 incorrect correlation.
25: Manifold air temp. sensor or intake air temp. high.
22: Throttle position sensor signal voltage is low.
26: Quad driver module or quad driver no. 1 error.

I tested the sensor that is located in the air intake duct ahead of the MAF sensor. It was out of range so I replaced it, but the code remains after others have come off. I may need to drive longer.
I'm not really sure what to do about the code 37, so that and the code 26 are what I really need info on.

New User

Apr 6, 2015, 9:09 AM

Post #2 of 3 (1169 views)
  post locked   Re: 2 digit codes showing as ABS codes  

    I made this post because I couldn't find the post that I had made last week, but I finally found the earlier post where I basically asked the same thing. Still any help would be great.

Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 6, 2015, 9:38 AM

Post #3 of 3 (1163 views)
  post locked   Re: 2 digit codes showing as ABS codes  

Here's your other thread with your posts. Two on same issues is just going to confuse the whole thing. This one locked so add what you want from here to there and keep that one till done please.

Other thread........

This one locked unless a mod wants to work in two places,


(This post was edited by Tom Greenleaf on Apr 6, 2015, 10:11 AM)

  Email This Post

Feed Button

Search for (options) Privacy Sitemap