|
| | |
|
|
BlountArrow
New User
Feb 2, 2012, 12:28 PM
Post #1 of 7
(5152 views)
Shortcut
|
|
2007 Hyundai Santa Fe P2187, wait there's more...
|
Can't Post
|
|
Okay, you gotta rookie here so I will do my best.
I have a 2007 Hyunda Santa Fe, V6 2.7L, it has 64,000mi on it and I am the 2nd owner.
Recently the check engine light came in out of the blue and I took it by Advance Auto Parts which revealed a computer code of P2187 - "System to Lean at Idle - Bank 1".
The light has been on for a few weeks now, and I've been monitoring the MPG and it does NOT seem to be affected. Furthermore, the car drives the same as it always has with no issues, EXCEPT:
When I stop the car to add fuel after I'm finished the car acts like it does not want to start. In fact, I have to push the gas pedal half way down and then turn the key to get the car to start and then it wants to die unless I keep feathering the gas pedal while parked at the gas station. However, as soon as I put it in drive and go 1/10 of a mile even, I can stop the car let off the gas and have no issues; everything is normal. Could you please help me narrow down this problem given the additional details? I've read it can be a MAF sensor, O2 sensor(s), a loose hose, and the latest I ran across was an exhaust manifold gasket....SO I'm hoping based on my experiences at the pump it might give the professionals some added insight into what the real issue might be. I don't mind taking my car to have it repaired if I have to, but I really need to avoid that if at all possible.
Many, many thanks in advance!
|
|
| |
|
|
Discretesignals
Veteran
/ Moderator
Feb 2, 2012, 6:30 PM
Post #2 of 7
(5097 views)
Shortcut
|
|
Re: 2007 Hyundai Santa Fe P2187, wait there's more...
[In reply to]
|
Can't Post
|
|
Part of the problem with the no start after refueling could be a stuck open EVAP purge valve. If the purge valve is stuck open during refueling fuel vapors get pushed into the intake manifold and cause an extremely rich fuel mixture. Remove the purge valve hoses and attempt to blow through the valve. If you can blow through it, the valve needs replaced.
Would need to look at the freeze frame records to see what variables the engine was at when the failure occurred for the lean condition. You would also need some fuel trim information to see if you have a vacuum leak or fuel pressure/injector spray volume problem.
Since we volunteer our time and knowledge, we ask for you to please follow up on your threads when a problem is resolved.
(This post was edited by Discretesignals on Feb 2, 2012, 6:38 PM)
|
|
| |
|
|
BlountArrow
New User
Feb 3, 2012, 1:20 PM
Post #3 of 7
(5075 views)
Shortcut
|
|
Re: 2007 Hyundai Santa Fe P2187, wait there's more...
[In reply to]
|
Can't Post
|
|
I'll see what I can do right now, I have no idea where these hoses are or the valve is located. I'm going to try to google it and see if I can find an image or something. If you happen to know of a way to tell me where it is or show me that would be great too. I will keep you posted on the progress too.
|
|
| |
|
|
Discretesignals
Veteran
/ Moderator
Feb 3, 2012, 1:25 PM
Post #4 of 7
(5069 views)
Shortcut
|
|
Re: 2007 Hyundai Santa Fe P2187, wait there's more...
[In reply to]
|
Can't Post
|
|
I'm going to let you in on a little secret. Hyundai and Kia are the only two vehicle manufactures that provide free service information to the public. All you have to do is register.
http://hmaservice.com/
Since we volunteer our time and knowledge, we ask for you to please follow up on your threads when a problem is resolved.
|
|
| |
|
|
BlountArrow
New User
Feb 3, 2012, 3:36 PM
Post #5 of 7
(5058 views)
Shortcut
|
|
Re: 2007 Hyundai Santa Fe P2187, wait there's more...
[In reply to]
|
Can't Post
|
|
Cool, I will check it out...I'm registering as I type.
|
|
| |
|
|
mdzimmer
New User
Feb 24, 2012, 5:36 PM
Post #6 of 7
(4937 views)
Shortcut
|
|
Re: 2007 Hyundai Santa Fe P2187, wait there's more...
[In reply to]
|
Can't Post
|
|
Were you able to fix your problem with your Santa Fe? I'm having the same exact issue and want to be sure I know what's going on before taking it to a mechanic to have it repaired.
Also, do you think this issue will continue after fueling and eventually the vehicle will not start? I'm stress out each time I get gas but after a few tries the vehicle starts up just as you have described.
Any additional information would be great!!!
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Feb 24, 2012, 6:14 PM
Post #7 of 7
(4938 views)
Shortcut
|
|
Re: 2007 Hyundai Santa Fe P2187, wait there's more...
[In reply to]
|
Can't Post
|
|
Don't post your car issue on another's thread. It just confuses people. Please start your own thread.
|
|
| |
|
|
|
| 2007 Hyundai Santa Fe P2187, wait there's more... |
|
|
|
|
|
|
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
