Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






Search Auto Parts

toyota truck ignitor test


  Email This Post



tuggie1
New User

Nov 10, 2005, 12:07 AM

Post #1 of 2 (14019 views)
toyota truck ignitor test Sign In

I have an 86 toyota engine (22RE) that I cannot get spark out of. I have done some resistance tests on the distributor as well as the coil. I suspect that the problem may lie within the ignitor. Is there some way to test this part, it is expensive to replace


DanD
Veteran / Moderator
DanD profile image

Nov 10, 2005, 5:22 AM

Post #2 of 2 (13997 views)
Re: toyota truck ignitor test Sign In

The info I have is kind of vague when it comes to testing the igniter, as in under the heading igniter in the test procedure it’s blank. I think what they’re saying is that if the ignition coil and pick-up coil resistance is correct and power is being feed to the system, replace the igniter.
There’s also a notation stating that the distributor on the 22RE is non-serviceable, so I don’t know if you can buy the igniter separately.
Here are the spec’s I have.
Coil primary tested across the positive and negative coil terminals .5 - .7 ohms.
Coil secondary tested at coil positive and coil tower 11,400 - 165,600.
Coil insulation tested at coil positive to distributor housing, reading should exceed 10 megaohms (infinity)
All these reading are taken with the coil isolated from the rest of the system in other words disconnected.
Pick-up coil 400 – 800 ohms
Here a diagram of the pick-up coil and where to test.



Canadian "EH"










  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap