|
|
81 MB No head light and I work at night... hlp me save my job plz.
|
|
|
| |
|
|
rcarz
New User
Jul 3, 2013, 11:00 PM
Post #1 of 4
(1083 views)
|
|
81 MB No head light and I work at night... hlp me save my job plz.
|
Sign In
|
|
1981 MB 300sd diesel Mileage unknown.
Ok, started with no headlights early this morning but had high beams still. After all my troubleshooting the high beams were gone too, but I could still hold my high beam/blinker lever back and get high beams. As I continued to hold this though, that too stopped working. I have done a lot of swapping of parts because I'm desperate with my job on the line. I can't drive in the dark and I work at night. Plz help if you can.
Here is what I've done so far.
1. Checked for any blown fuses.
2. Swapped out every relay. (don't know the right one.)
3. Changed the light switch and now I'm not clear if all the wires are in the right place. Need help with this if possible? Anyone know of a diagram?
4. Changed the column switch.
5. cried like a little girl.
When I changed the light switch the brights stopped working so I may have a wire out of place. I don't know what else to try but I need to make sure all the wires are in the right place so I can put it back together.
I should add that the first position on the light switch works, the second works, the third is off, the fourth works and the fifth only has the parking lamps with no head lights.
I work nights so I could really use the help. Thanks in advance.
|
|
| |
|
|
rcarz
New User
Jul 4, 2013, 7:44 AM
Post #2 of 4
(1049 views)
|
|
Re: 81 MB No head light and I work at night... hlp me save my job plz.
|
Sign In
|
|
Can anyone link a diagram for the color of wires and such?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 4, 2013, 8:13 AM
Post #3 of 4
(1046 views)
|
|
Re: 81 MB No head light and I work at night... hlp me save my job plz.
|
Sign In
|
|
Links aren't allowed here and our professional data bases don't go back that far.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
rcarz
New User
Jul 5, 2013, 2:45 AM
Post #4 of 4
(1029 views)
|
|
Re: 81 MB No head light and I work at night... hlp me save my job plz.
|
Sign In
|
|
Ok, I can understand that. Can you help with this then? I changed out all the relay's, checked all the fuses, Changed out the switches (one that turns lights on and the turn signal switch that controls the high beams. After this the brights stopped working too. I found you could put them on by holding the turn signal switch back. (used a lot to flash high beams.) I rigged the thing to always flash the brights by sticking something behind the lever so it couldn't relax, but now I need to try and fix it for real. If you could help me?
Does this give any clues as to what is happening?
(This post was edited by rcarz on Jul 5, 2013, 7:44 AM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
2006 Toyoto Camry XLE Driver Side Electric Window Trouble
Tierod end change caused some kind of leak
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
