Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

2005 nissan altima headlights stays on


  Email This Post



Taylor Electronics
User

Aug 30, 2016, 7:19 PM

Post #1 of 6 (1558 views)
2005 nissan altima headlights stays on Sign In

hello guys we have a wierd problem on my wife 2005 nissan altima when she stops the car and turn the engine off open the door gets out and close door and the headlights remain on. it was doing it every once and a wile but now it is so bad we half to take the cable off the battery and when i put the cable back on the battery the lights are off then in about 1 minute they are back on. do any one have an ideal. Thank you for your input william


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Aug 31, 2016, 4:31 AM

Post #2 of 6 (1544 views)
Re: 2005 nissan altima headlights stays on Sign In

Are the parking lights staying on along with the head lamps? Is it the high or low beams? Does this have the automatic headlamp feature?


Quote
BATTERY SAVER CONTROL
When the combination switch (lighting switch) is in the 2ND position (ON) and the ignition switch is turned from ON or ACC to OFF, the battery saver control feature is activated.

Under this condition, the headlamps remain illuminated for 5 minutes, unless the combination switch (lighting switch) position is changed. If the combination switch (lighting switch) position is changed, then the headlamps are turned off.






Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Aug 31, 2016, 4:35 AM)


Taylor Electronics
User

Aug 31, 2016, 10:43 AM

Post #3 of 6 (1530 views)
Re: 2005 nissan altima headlights stays on Sign In

hello again no the head lamps is the only thing that on and it is the two out side lamps low beams. no park lights are on don't know about battery saver control here is the vin VIN: 1n4al11d95c170095 Thanks william

In Reply To
Are the parking lights staying on along with the head lamps? Is it the high or low beams? Does this have the automatic headlamp feature?


Quote
BATTERY SAVER CONTROL
When the combination switch (lighting switch) is in the 2ND position (ON) and the ignition switch is turned from ON or ACC to OFF, the battery saver control feature is activated.

Under this condition, the headlamps remain illuminated for 5 minutes, unless the combination switch (lighting switch) position is changed. If the combination switch (lighting switch) position is changed, then the headlamps are turned off.




Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Aug 31, 2016, 3:25 PM

Post #4 of 6 (1525 views)
Re: 2005 nissan altima headlights stays on Sign In

Do the wipers work? Are these halogen or xenon headlamps? Sorry for all the questions, but the more information the better.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Aug 31, 2016, 3:27 PM)


Taylor Electronics
User

Aug 31, 2016, 4:36 PM

Post #5 of 6 (1518 views)
Re: 2005 nissan altima headlights stays on Sign In

hello yes the wipers does work and i have halogen lamps and we don't mine the questions i understand we just thank you for the help william

In Reply To
Do the wipers work? Are these halogen or xenon headlamps? Sorry for all the questions, but the more information the better.



Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Aug 31, 2016, 4:50 PM

Post #6 of 6 (1517 views)
Re: 2005 nissan altima headlights stays on Sign In

Do you have a wiring diagram? The body control module gets switched input from the headlamp switch. When the head lamp switch is turned on the BCM will send a datalink message to the IPDM (integrated power distibution module) The CPU inside the IPDM gets the message and grounds the low beam headlamp relay coil to close the relay contacts that allow power to the low beam head lamp filaments.



I can tell you that you will probably need an enhanced scan tool to look at BCM and IPDM data stream information. There is probably also some bi directional control you can do with the right scan tool to command the low beam head lamp relay. I've been reading they are having a lot of issues with the IPDM on those.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap