Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

2003 Mercury Grand Maquis - Voltage output drop


  Email This Post



Tom Laquidara
New User
Tom Laquidara profile image

Nov 18, 2006, 4:41 PM

Post #1 of 5 (1280 views)
2003 Mercury Grand Maquis - Voltage output drop Sign In

On two occassions about a month apart, my voltage light went on and the meter dropped to the typical battery output level. After turning off car and restarting, it came back up to normal voltage level. In between these two occassions I do notice a slight slowness in the voltage needle reaching the normal level. Could this be brushes, or regulator? Thanks.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Nov 18, 2006, 8:06 PM

Post #2 of 5 (1275 views)
Re: 2003 Mercury Grand Maquis - Voltage output drop Sign In

I'll bet it's brushes as the diodes would normally stay broken. If you feel ok with taking the alternator apart you can use mega fine sandpaper (croakus cloth) and shine up the surfaces but don't go nuts as these parts don't give you tons of extra for working with, T



Tom Laquidara
New User
Tom Laquidara profile image

Nov 19, 2006, 7:41 AM

Post #3 of 5 (1272 views)
Re: 2003 Mercury Grand Maquis - Voltage output drop Sign In

Thanks. I've replaced brushes many years back but with the built in regulator and all I'm not even sure where they are. Would they be just below the 3-wire connector? Is purchasing new brushes an option? Thanks again for your thoughts.


steve01832
Veteran
steve01832 profile image

Nov 19, 2006, 8:07 AM

Post #4 of 5 (1271 views)
Re: 2003 Mercury Grand Maquis - Voltage output drop Sign In

Nowadays there are electrical shops that do that. It is easier and cheaper to buy a remanufactured alternator.

Steve


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Nov 19, 2006, 9:57 AM

Post #5 of 5 (1266 views)
Re: 2003 Mercury Grand Maquis - Voltage output drop Sign In

Steve said it probabably is the most efficient way is to buy rebuilt. A good rebuilder will have checked out their parts before they send them out for sale.

The places that rebuild them are mostly good. Even if you have the time it really is a toss up, T







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap