|
|
2001f-150 brake lights won't work
|
|
|
| |
|
|
Rollyhenthorn
Novice
Nov 2, 2013, 12:14 PM
Post #1 of 13
(1402 views)
|
|
2001f-150 brake lights won't work
|
Sign In
|
|
2001 ford f-150 5.4 crew cab 200,000 mls my problem is brake lights won't work ,they quit about 6 months ago found brak light switch replaced. 3 months bad again replaced know bad again BUT found the switch not realy bad. If I push in button with screw driver it works so I got another one (all warranty) is it possible for the brake shaft to wear on the end that touches switch button??? ( hard to believe steal wear before plastic) Can someone please help???
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 2, 2013, 1:24 PM
Post #2 of 13
(1386 views)
|
|
Re: 2001f-150 brake lights won't work
|
Sign In
|
|
It's adjustable, isn't it?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Rollyhenthorn
Novice
Nov 2, 2013, 1:48 PM
Post #3 of 13
(1382 views)
|
|
Re: 2001f-150 brake lights won't work
|
Sign In
|
|
No not that styl
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 2, 2013, 1:55 PM
Post #4 of 13
(1381 views)
|
|
Re: 2001f-150 brake lights won't work
|
Sign In
|
|
The type you have connects right the push rod so you have to have installed something wrong. Just the pressure of the brake pedal activates this switch. Make sure nothing is pulling on it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Rollyhenthorn
Novice
Nov 2, 2013, 4:18 PM
Post #5 of 13
(1374 views)
|
|
Re: 2001f-150 brake lights won't work
|
Sign In
|
|
Thanks for the reply I found one of the wires that plugs in the switch has loos connection in plug I guess I need new plug? Do you know how get wires out of plug??
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 2, 2013, 4:25 PM
Post #6 of 13
(1369 views)
|
|
Re: 2001f-150 brake lights won't work
|
Sign In
|
|
There is a special tool to remove the terminals from the plug and if you need to replace one, you not only have to find the right terminal but you need special crimpers also.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 2, 2013, 4:25 PM
Post #7 of 13
(1368 views)
|
|
Re: 2001f-150 brake lights won't work
|
Sign In
|
|
Do you mean the terminal came out of the connector? Can you take a picture of the connector? Close up is preferable.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Nov 2, 2013, 4:26 PM)
|
|
| |
|
|
Rollyhenthorn
Novice
Nov 2, 2013, 7:53 PM
Post #8 of 13
(1358 views)
|
|
Re: 2001f-150 brake lights won't work
|
Sign In
|
|
No it didn't come out but if you move the wires it looses connection lights go out. I think bad in housing?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 2, 2013, 7:59 PM
Post #9 of 13
(1357 views)
|
|
Re: 2001f-150 brake lights won't work
|
Sign In
|
|
You may have to use a pick to tighten the contacts in the plug.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Rollyhenthorn
Novice
Nov 3, 2013, 4:21 AM
Post #10 of 13
(1347 views)
|
|
Re: 2001f-150 brake lights won't work
|
Sign In
|
|
Do you have a pic to show how to tighten the plug if that's all it is id rather do that than buy a new one at $50. Thanks for your hepl
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 3, 2013, 6:36 AM
Post #11 of 13
(1343 views)
|
|
Re: 2001f-150 brake lights won't work
|
Sign In
|
|
Depends on the style of connector. Sometimes you can adjust the terminal tension using a small sewing needle and sometimes you have to take the terminal out of the connector body to adjust the tang.
Skip to 5 minutes in the video to see how this style of connector can be retensioned. You'll get the basic idea.
http://www.youtube.com/watch?v=E8sBg7kMbOw
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Rollyhenthorn
Novice
Nov 3, 2013, 8:08 AM
Post #12 of 13
(1337 views)
|
|
Re: 2001f-150 brake lights won't work
|
Sign In
|
|
That seems to have done the job making better connection know . Do you happen to have a video showing how to pull those pins out .??? If not thanks again you saved me $50 so far.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 3, 2013, 10:04 AM
Post #13 of 13
(1333 views)
|
|
Re: 2001f-150 brake lights won't work
|
Sign In
|
|
Sorry don't have a video on taking the connector apart. If you take a pic of it, might be able to give you some advice on how to get it apart.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
