|
|
cadotter
User
Jul 17, 2014, 10:41 AM
Post #1 of 7
(1590 views)
|
|
1993 chevy c1500 help!!
|
Sign In
|
|
I have a 93 Chevy c1500 4wd with a 305 and 5 SPD and noticed while under the hood (just bought the truck) there is no connector or wires I can c for the temp gauge on the side of the block and also the oil switch as well. the oil switch looks like a one pin and the temp switch is a prong connector or whatever u call it lol.....can anyone tell me where to find these wires and see if the connectors are gone or how to install them. thanks!
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 17, 2014, 10:48 AM
Post #2 of 7
(1583 views)
|
|
Re: 1993 chevy c1500 help!!
|
Sign In
|
|
They should be coming right out of the harness in the area.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
kev2
Veteran
Jul 17, 2014, 10:59 AM
Post #3 of 7
(1580 views)
|
|
Re: 1993 chevy c1500 help!!
|
Sign In
|
|
a 1993- A temp switch is in cylinder head approx between plugs 1 & 3. a single green wire. The wire for the switch comes out of the harness that splits behind the alternator.
oil pressure is a switch mounted - top rear of engine next to the DIST-- harness breaks out of main harness attached to firewall.
- what is not workiing? what codes does it show? might help ID what you seee
PS there is also a temp sensor in manifold at the thermostat...
(This post was edited by kev2 on Jul 17, 2014, 11:06 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 17, 2014, 11:02 AM
Post #4 of 7
(1579 views)
|
|
Re: 1993 chevy c1500 help!!
|
Sign In
|
|
It sounds like he has located the sensors, just not the wires that go to them.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
cadotter
User
Jul 17, 2014, 2:26 PM
Post #5 of 7
(1559 views)
|
|
Re: 1993 chevy c1500 help!!
|
Sign In
|
|
correct hammer time I need to find the wires I don't c the connectors anywhere
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 17, 2014, 2:28 PM
Post #6 of 7
(1558 views)
|
|
Re: 1993 chevy c1500 help!!
|
Sign In
|
|
They have to be there somewhere. If not, at least the stub where the wire was cut off.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
kev2
Veteran
Jul 18, 2014, 1:37 AM
Post #7 of 7
(1548 views)
|
|
Re: 1993 chevy c1500 help!!
|
Sign In
|
|
reread my post I described where the wires break out of main harnesses - even the color -green- of wires...the other-oil sensor- would have the male connector to ID the wires...
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
