Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

1998 dodge grand caravan


  Email This Post



varuuth
New User

Oct 4, 2010, 9:51 AM

Post #1 of 3 (2676 views)
1998 dodge grand caravan Sign In

I have a 1998 dodge grand caravan , What I need to know is this:

On the back of the car deck (factory original) it has 2 wiring harnesses, also the antenna, also the ground wire. There is another wire a thin black wire. What is that wire for? Also how do I disconnect it? I am trying to put in a new aftermarket radio.
Thanks


jk306
User

Oct 4, 2010, 12:13 PM

Post #2 of 3 (2666 views)
Re: 1998 dodge grand caravan Sign In

I would recommend getting a wiring harness for your car to install the stereo. It makes it much easier to install as you can just match up the colors and no cutting of the wire plug is required.

To release the wire harness from the stereo, you will need a small flat head screwdriver to release the clip, and it should pull right out.

The thin black wire is not required for the installation, so just leave it alone and tape it off or secure it with a zip tie.

The braided wire is the ground, so make sure it is secured with the ground wire on the stereo wire harness.


varuuth
New User

Oct 4, 2010, 12:46 PM

Post #3 of 3 (2662 views)
Re: 1998 dodge grand caravan Sign In

thanks for the reply.
you say it is not needed for the install of the new stereo, but.. i'm curious do you know what the black wire is for?






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap