|
|
lyonnel2
Novice
Mar 24, 2011, 11:48 AM
Post #1 of 18
(2095 views)
|
1996
Geo Prizm
1.6
187,000
Hello
I'm now have a 1996 Geo Prizm
My problem is when I apply my brakes I hear a squealing
sound, also when turning right or left while driving. In the
last two months I have installed new front brake pads and
new front rotors (both sides) What seems to be the problem?
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 24, 2011, 2:09 PM
Post #2 of 18
(2092 views)
|
If from your new brakes it could be that brand of pads just has a problem. You may need to go back, make sure calipers are lubed where they should be and pins if used. They also make a goo you can put on the back side of pads to help squealing. If job is new enough you might need a different brand of pads and complain where you bought the others. Ceramic pads about never make peep and if legal for the car and of course cost more but last for ages, make no brake dust and are silent.
There's an outside chance that wear sensors and bent in too close but those usually shut up when applying the brakes.
Can't think of much else right now that could be so annoying. Over the years I've had vehicle that just were noisy and tried everything to shut them up. Changing brand worked the best,
T
|
|
| |
|
|
lyonnel2
Novice
Mar 24, 2011, 3:47 PM
Post #3 of 18
(2085 views)
|
Thank You, Tom I will try changing pads. Will keep you informed
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 24, 2011, 4:12 PM
Post #4 of 18
(2079 views)
|
My new fav is Centric ceramic. Last forever, feel great, no noise or dust - worth it. If that totally works I'd scream about the old ones if you just did this. If very recent I'll say you can leave the rotors alone but there could be some break in period so use caution at first,
T
|
|
| |
|
|
lyonnel2
Novice
Mar 24, 2011, 4:26 PM
Post #5 of 18
(2072 views)
|
Tom
I will do a price check on the pads that you suggested and will give the new rotors some more wearing time it has
been just a week since they were installed.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 24, 2011, 4:36 PM
Post #6 of 18
(2066 views)
|
One week you should be fine,
T
|
|
| |
|
|
lyonnel2
Novice
Mar 24, 2011, 8:00 PM
Post #7 of 18
(2054 views)
|
I checked with auto zone for pricing, I have two choices, 1. do a upgrade or 2.but the same brake pads and have them
greased before installing.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 24, 2011, 8:43 PM
Post #8 of 18
(2050 views)
|
I don't know what they meant by greasing brake pads! You do grease where metal parts move but NEVER where the friction is. They may not have "Quiet" pads and package would be marked as such. NAPA is more likely to have quiet pads by even another brand than I mentioned. Just checked Autozone's site and there was quite a selection but none at the site stated "quiet" - the pads probably should come with a metal backing plate but you'd have to look at the counter as it was too hard to see from their site,
T
(This post was edited by Tom Greenleaf on Mar 24, 2011, 8:52 PM)
|
|
| |
|
|
lyonnel2
Novice
Mar 25, 2011, 5:22 AM
Post #9 of 18
(2043 views)
|
 Hi Tom
You are correct. Here is what I found online:Wagner ThermoQuiet® Brake Pads - Front $51.99
Advance Auto Parts
Auto Zone Duralast Gold/Brake Pads - Front (ceramic)
Price:
$39.99
Also Duralast Gold Cmax/Brake Pads - Front (quiet ceramic)
Price:
$59.99
Have to wait until the first of April to make the switch
|
|
| |
|
|
lyonnel2
Novice
Mar 25, 2011, 7:46 AM
Post #11 of 18
(2035 views)
|
This is the set of brake pads I plan to buy:Duralast Gold Cmax/Brake Pads - Front
Price:
$59.99
Notes: Premium ceramicUltra Quiet with patented nitrile rubber shim. Disc hardware included.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Mar 25, 2011, 8:15 AM
Post #12 of 18
(2032 views)
|
That would be a good choice
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 25, 2011, 9:12 AM
Post #13 of 18
(2025 views)
|
You have been doing a lot of hunting lionell. Agree that last one sounds good. I'm spoiled as I live right near New England's largest (probably) brake only warehouse outlet that simply has and can do anything,
T
(This post was edited by Tom Greenleaf on Mar 25, 2011, 9:17 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Mar 25, 2011, 9:24 AM
Post #14 of 18
(2015 views)
|
Most of the better pads come with a little packet of special grease. Spread an even coat at all the contact areas of the BACK of the pad. Be careful not to get any on the rotor or contact surface.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
lyonnel2
Novice
Mar 25, 2011, 11:26 AM
Post #15 of 18
(2009 views)
|
I know that saves a lot on pads and shoes I have enjoyed your feedback
Again, I will let you know when I replace the pads.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Mar 25, 2011, 11:34 AM
Post #16 of 18
(2006 views)
|
That is done to quiet noises, not extend life of the pads
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
lyonnel2
Novice
Mar 25, 2011, 4:22 PM
Post #17 of 18
(1999 views)
|
Thanks, Tom
I will get back with you in a week or two, bye
|
|
| |
|
|
Mr.scotty
Enthusiast
Apr 25, 2011, 9:28 PM
Post #18 of 18
(1880 views)
|
I have this problem 90% of the time when i get brakes from autozone, but never pepboys.
--------------------------------------------------------
Your only as good as your tools!
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
