99 Merc sable ball joint - Engine and Car Noises


	Auto Repair Home	SEARCH POSTS	WHO'S ONLINE	LOG IN

Automotive Repair

Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:
  Login
  Sign up here!

Latest Forum Post

2006 Toyoto Camry XLE Driver Side Electric Window Trouble

Hello, Looking for a little brain help ...

Tierod end change caused some kind of leak

Hello so I just took my car to the nearb...

2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes

When I bought this car in summer 2023, a...

Grounding Cable, 2017 Jeep Renegade Trailhawk

The Cable that connects my negative batt...

Rough Idle (Found new thing)

Hi everyone. First of all sorry for bad ...

equipment

hey yall. im a first year engineering st...

HELP

I have a 1956 1/2 ton panel truck, 69 35...

Howdy

    Just wanted to s...

ABS/Tractiob/Brake Lights on But No DTCs

Hello all, Recently while driving m...

Chevy strut replacement

I'm trying to get a sensor of some kind ...

99 Merc sable ball joint

Sign up here!

Email This Post

Auto Repair Home>> Automotive Repair>> Engine and Car Noises

fuzzy1
User

Feb 27, 2010, 6:09 AM

Post #1 of 4 (2061 views)

99 Merc sable ball joint	Sign In

Good Day,
I have a 1999 Merc Sable and im having problems separating the lower ball joint from the lower control arm. The hub bearing is bad and i dont want to damage the good ball joint with a pickle fork. Any ideas? I've tried a 7 foot pry bar and hammer to loosen but no luck.

nickwarner
Veteran / Moderator
nickwarner profile image

Feb 27, 2010, 11:18 AM

Post #2 of 4 (2051 views)

Re: 99 Merc sable ball joint	Sign In

I doubt this is going to come apart without the pickle fork, but just separating the joint with the fork shouldn't damage it. Might tear the rubber boot a bit, but if you're careful this can be minimized. With that 7 foot bar you are putting pressure on more than just the ball joint, and could possibly do damage if you get too rough. The pickle fork is only applying pressure exactly where you need it to be. If the joint comes apart from that, it wasn't a good joint to begin with.

way2old
Veteran / Moderator
way2old profile image

Feb 27, 2010, 11:20 AM

Post #3 of 4 (2050 views)

Re: 99 Merc sable ball joint	Sign In

Usually a big hammer where the ball joint goes through the spindle will free it. Just be sure to hit on a solid part on the spindle directly where the ball joint goes through.

Being way2old is why I need help from younger minds

fuzzy1
User

Feb 27, 2010, 6:11 PM

Post #4 of 4 (2038 views)

Re: 99 Merc sable ball joint	Sign In

ok. got the darn thing out.. turns out a good solid pitman arm puller does the trick.. fit like a glove and 5 turns of the ratchet and it popped loose.
I did try the hammer idea as I have for many years along with the big bar and had no luck, so a little online research proved the pitman arm puller to work best.
I greatly appreciate the info.
Thanks Fuzzy1

Email This Post

Search for (options) Privacy Sitemap