|
|
2005 sebring 2.4 engine knock @high rpm
|
|
|
| |
|
DOUGclark
Novice
Jun 7, 2014, 8:11 AM
Post #1 of 8
(1760 views)
|
2005 sebring 2.4 engine knock @high rpm
|
|
|
Number 3 piston rod bearing loose, making tapping sound at high RPM. Just rebuilt motor with all new main bearings and rod bearings. What do I need to do to correct problem and silence the tapping noise. Any thoughts would be very helpful to me. I'm at a loss and don't know what to do Thank you for taking the time to read this and possibly respond.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 7, 2014, 8:16 AM
Post #2 of 8
(1749 views)
|
Re: 2005 sebring 2.4 engine knock @high rpm
|
|
|
You need to do all the things that were supposed to have been done during the so called rebuild. All the journals should have been measured, the correct bearings selected and all the clearances measured with plastigage before the motor was assembled. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
DOUGclark
Novice
Jun 7, 2014, 8:34 AM
Post #3 of 8
(1741 views)
|
Re: 2005 sebring 2.4 engine knock @high rpm
|
|
|
thanks hammertime All the thing you saidd were done ,pistons inspected by pro company, ect just wonderin if anyone had any helpful advice .
|
|
| |
|
DOUGclark
Novice
Jun 7, 2014, 8:37 AM
Post #4 of 8
(1738 views)
|
Re: 2005 sebring 2.4 engine knock @high rpm
|
|
|
I goota go now ILL check back 2night thanks every1
|
|
| |
|
DOUGclark
Novice
Jun 7, 2014, 12:30 PM
Post #6 of 8
(1717 views)
|
Re: 2005 sebring 2.4 engine knock @high rpm
|
|
|
Sorry I even asked you a question nothing but a waste of time you don't have a clue what you r talking about. these people r lookin for answers not a boring generic scriped one liner your site will continue to suck until you get some1 who not a DICKHEAD PUNK replyin with his little sarcastic comments. I tried to be nice. good bye forever heroin junkies oops I mean car#$%^&%$s.com
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 7, 2014, 12:36 PM
Post #7 of 8
(1715 views)
|
Re: 2005 sebring 2.4 engine knock @high rpm
|
|
|
Someone isn't satisfied and there is no need for being vulgar. You stated you had a rod bearing issue. What other advise can be given other than tearing it back down and checking bearing clearances again? Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 7, 2014, 1:10 PM
Post #8 of 8
(1709 views)
|
Re: 2005 sebring 2.4 engine knock @high rpm
|
|
|
I gave you a straight and correct answer and you decided to run your mouth. You can ask for help elsewhere. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|