Main IndexAuto Repair Home Search Posts SEARCH
Who's Online WHO'S
Log in LOG

Search Auto Parts

brake bleeding problem

  Email This Post


Feb 19, 2013, 6:36 PM

Post #1 of 3 (1830 views)
  post locked   brake bleeding problem  

Hi there everyone it's a 2002 Hyundai accent 1.5 engine without abs, just want to know the brake bleeding eloquence, I,m having spongy brake pedal after I replace the brake lines and master cylinder, I bleed the system more than once. the point is may be I have to do it in the proper sequence and I don't know that need you help.

Veteran / Moderator
nickwarner profile image

Feb 19, 2013, 6:41 PM

Post #2 of 3 (1825 views)
  post locked   Re: brake bleeding problem  

You need to properly bench bleed the master cylinder prior to installing it on the vehicle. After that you would start at the furthest wheel from the master working toward the closest. So right rear, left rear, right front, left front.

If the bench bleeding of the master isn't done you will be pulling your hair out trying to get this to bleed.

Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Feb 19, 2013, 7:58 PM

Post #3 of 3 (1803 views)
  post locked   Re: brake bleeding problem  

Tes, you have been warned more than once about these duplicate questions. Knock it off.


We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.

  Email This Post

Feed Button

Search for (options) Privacy Sitemap