Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

Need Help!!! Regarding hub assembly


  Email This Post



Hollidayexpress
New User

Feb 18, 2016, 5:46 PM

Post #1 of 4 (1511 views)
Need Help!!! Regarding hub assembly Sign In

I have a 98 Monte Carlo. I'm doing my brakes and rotors. I can into a issue that I have a bad hub assembly. So purchased new on and as I was taking it off i stripped a bolt. Tried heat and large amounts of on blaster didn't help. Used a easy out and it's to stripped to get a good grip. So decided to drill it and use a bolt extracter. Would budge an inch then ended up snap the tip of the extractor off. I'm not sure what else I can try. I need help. Need to get it done.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Feb 18, 2016, 6:13 PM

Post #2 of 4 (1504 views)
Re: Need Help!!! Regarding hub assembly Sign In

Sounds like you've already made all the mistakes.

Your next call should be to a tow truck and then beg a shop to to be willing to work on it now. I know I sure wouldn't.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Feb 19, 2016, 9:11 AM

Post #3 of 4 (1488 views)
Re: Need Help!!! Regarding hub assembly Sign In

You're better off buying another knuckle. Check some of the salvage yards. The only other option is to remove the knuckle and take it to a machinist.

Those extractors are probably made from hardened tool steel. You not going to be able to drill through that unless you have an end mill.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Feb 19, 2016, 9:25 AM)


nickwarner
Veteran / Moderator
nickwarner profile image

Feb 20, 2016, 5:27 PM

Post #4 of 4 (1457 views)
Re: Need Help!!! Regarding hub assembly Sign In

If you know someone who has a welder, have them weld a nut onto the end of the bolt. Then heat the end of the housing and use an impact.

If you have no access to those things, I would try what DS says. Perhaps a local weld shop might be able to get it out were you to bring the spindle to them. You would still be left with the issue of fixing the threads. Don't go to a big name shop, try a mom n pop type welding or machining outfit. Let them know you pay cash. Might get the issue fixed without a massive cash outlay.

Dealing with seized bolts will lead to dealing with what you have unless you have the gear to remove it. We deal with that every day. I'm in the heart of the rustbelt, so this is kind of a normal day to see things like this. Easy Outs rarely will solve your issue, and most people do not use a large enough one anyhow. An oxy-fuel torch to make things glow red and a good welder (with the skill to make good welds) are par for the course in my neck of the woods.






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap