Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Elantra: Brake Pedal Resists When Starting Car, Then Works Normally


Search for (search options)
 



jdanniel
New User

Aug 4, 2022, 8:13 AM

Post #1 of 4 (1382 views)
  post locked   Elantra: Brake Pedal Resists When Starting Car, Then Works Normally  

Hello, everyone.

I leased a 2021 Hyundai Elantra in April of 2021. As of this writing, it only has 6,820 miles on it. I’m very happy with it.

But I do have a question.

The car starts via push button, not a key. In order to start the car, you have to tap lightly on the brake pedal, then push the start button.

About two weeks ago, when I tried tapping the brake pedal to start the car, the brake pedal was stiff. In other words, the pedal resisted. It never did before.

When I pressed the start button, the brake pedal became normal.

If I stop the car for a short period of time, then try starting it up again, the brake pedal has no resistance. The pedal resists only after the car has been sitting a while.

I experience NO problems with the car whatsoever, once I start it. The brakes work fine. I do not see any warning lights or indicators at all. I see no warnings about the brakes, nothing whatsoever that indicates there is something wrong.

Somebody I know told me it might be a vacuum assist issue, but I want to know if this is something serious that I should be concerned about, or if it’s a minor issue. I do plan on taking the car to the dealer to have it looked at, but I’ve been so busy at work, I haven’t had time.

Can the issue be diagnosed just from what I’ve said? If it is, indeed, the vacuum assist, is it serious? Can it be something else?

Thank you for any assistance you care to give.
J. Danniel


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Aug 4, 2022, 9:16 AM

Post #2 of 4 (1376 views)
  post locked   Re: Elantra: Brake Pedal Resists When Starting Car, Then Works Normally  


Quote
Somebody I know told me it might be a vacuum assist issue,


I tend to agree with that. It sounds like the stored vacuum in the booster is leaking down while it is parked.

This isn't a big deal at this point as everything works normal when the engine is started. This will happen to any car if the brake pedal is pushed more than once before starting the engine.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



jdanniel
New User

Aug 4, 2022, 2:21 PM

Post #3 of 4 (1357 views)
  post locked   Re: Elantra: Brake Pedal Resists When Starting Car, Then Works Normally  

Thank you very much for your response and assistance. I do plan on having the system checked, but it is reassuring to hear it's not a serious problem. Thank you again.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Aug 4, 2022, 2:26 PM

Post #4 of 4 (1353 views)
  post locked   Re: Elantra: Brake Pedal Resists When Starting Car, Then Works Normally  

You're welcome

Closing this question now.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







 
 
 






Search for (options) Privacy Sitemap