Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

1998 chevy cavilear abs light on and ets off


  Email This Post



wonderme
New User

Jan 6, 2015, 3:52 PM

Post #1 of 5 (1471 views)
post icon 1998 chevy cavilear abs light on and ets off Sign In

I changed the rear bearings left and right. They came with the electrical connectors for ABS that fit correctly. I even cleaned the contacts after the lights came on. Now I have a ABS light on and a ETS light on which says ETS off on the dash. I've checked the fuse (Good) and called auto zone to make sure they were the correct ones which they said were. Any Help would be appreciated. James


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jan 6, 2015, 4:07 PM

Post #2 of 5 (1465 views)
Re: 1998 chevy cavilear abs light on and ets off Sign In

What are the ABS code numbers being set?



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



wonderme
New User

Jan 6, 2015, 4:15 PM

Post #3 of 5 (1462 views)
Re: 1998 chevy cavilear abs light on and ets off Sign In

Sorry I haven't got a scan done. The local auto stores can't scan it and a shop wonts $70.00 to trouble shoot. James


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jan 6, 2015, 4:29 PM

Post #4 of 5 (1458 views)
Re: 1998 chevy cavilear abs light on and ets off Sign In

Well, we can't do that from here and we can even begin to guess at the problem without the codes. You're going to have to get them read.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Jan 6, 2015, 4:46 PM

Post #5 of 5 (1455 views)
Re: 1998 chevy cavilear abs light on and ets off Sign In

Since this all started after you replaced the rear wheel bearings, you could use an ohm meter and measure the resistance of both wheel speed sensors to see how they compare. Should be around 2.1-2.4K ohms. Could have a defect. If that doesn't work, you could measure the AC voltage using your multimeter to see if the sensor can even generate a signal when you spin the wheel.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Jan 6, 2015, 4:53 PM)






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap